Positive Inducing Fans Series PIV

一、产品特点 Product Features

体积小 ，重量轻 ，节省空间 ，安装方便 ，无需管路 ，减少投资 ，针对性强 ，效果好。

Small-size and light-weight ; Easy installation with no additional ducts required ; Highly targeted and cost-effective .

高效节能 ：采用气体诱导的方式 ，让空气流动。

Energy-efficient: inducing air through the high velocity discharge produced.

挠性金属喷嘴 ：可随意调整出风角度。

Flexible metallic nozzle with easily adjustable discharge angles .

智能诱导功能可选 ：区域联动 ，节能可靠。

Intelligent  positive  inducing  function  available:  sub-regions interlinked to ensure energy efficiency and reliability.

优质的镀锌钢板外壳 ，可选静电环氧喷涂。

Housing made of quality galvanized steel sheet; housing finished with electrostatic epoxy coatings also available.

二、技术参数 Technical Parameters

三、外形尺寸图 Outline Dimensions

四、风机的安装 Fan Installation

V系列诱导风机可采用吊装和吸顶两个安装方式。吸顶安装分为横吊式、纵吊式、悬挂式。安装时，高度不宜太高，离地高度以2.3～3米为宜。风机出风口和进风口500mm内不得有障碍物。采用吊装方式时，应配备弹簧减振器，采用吸顶方式时，应在螺钉固定处加橡胶减振器。射流风机排布距离小于风机射程，出风口不应相互抵触。

Positive inducing fans Series V can be ceiling-hung and ceiling-mounted. When ceiling-mounted, fans can be horizontally hung, vertically hung or wall-mounted.They should not be mounted too high (preferably 2.3~3 meters high above the ground) and there shall not be any obstructions within 500mm from inlets and outlets. When ceiling-hung, there shall be spring isolators. When ceiling-mounted, Neoprene isolators shall be added to screws. The spacing between fans shall be smaller than the discharge range so that airstreams from different outlets do not collide.